McNeilus M2

Customers like options. And that’s why we’ve got another solution for global refuse collection needs. The M2 Rear Loader is ideal for international haulers looking for a lighter weight rear loader. It’s also built for reliability and with an easy-to-maintain body that can be mounted on a single-axle chassis.

With many of the same attributes as our Standard Rear Loader, the M2 is available in 17-, 20-, 25-, and 28-cubic-yard body configurations. It’s rugged design and low cost of maintenance make it an attractive global option.

McNEILUS M2 SPECS-PERFOMANCE SHEET>> DOWNLOAD

Specifications
BODY SPECIFICATIONS

Floor 3/16" AR200
Roof 10 GA AR200 STEEL
Side Walls (front) 10 GA AR200 STEEL
Side Walls (back) 10 GA AR200 STEEL
TAILGATE AND HOPPER
Floor (hopper thickness) 1/4" AR200 STEEL
Quick-change UHMW polyethylene slide shoes

PACKER

Slide Face Plate 3/16" ASTM A572 GR 50 STEEL
Sweep Face Plate 1/4" AR200 STEEL
Packer Edge Strip 3/4" ASTM A36

HYDRAULICS

Pump Make/Model Parker Model P350
Pump Size 1.5'
Pump Flow 24 gpm @ 1300rpm
Control Valves VA 20 for ejector and TG lift and VA 35 for slide and sweep
Oil Reservoir 40 Gallons
Filter Return filter 10 micro
Suction Strainer 141 mesh stainless steel with magnets

CYLINDERS

Ejector 6.25" x 4.50" x 3.56" (17yd, 2 stages 71.50” in length)
6.50" x 5.50" x 4.50" x 3.56" (20yd, 3 stages 88.75" in length)
6.50" x 5.50" x 4.50" x 3.50" x 3.68" (25yd, 4 stages 123.31" in length)
Sweep Cylinder 4" x 2-1/2" x 23"
Slide Cylinder 4" x 3" x 32-1/2"
Tailgate Cylinder 3.00" x 2-3/8" x 38"

HARDWARE

Weather Pak Connector—Deutsch Connectors
Aeroquip Hoses and Fittings
Hydra-Zorb and Stauff Clamps

PAINTING

Packer and components steel shot blasted prior to priming with high solids epoxy primer.
Finish Coat Akzo Coating's Sikkens high solids acrylic urethane.
Solid white standard.
Container tipper (kick bar)
Winch