Split Body Rear Loader

The Split Body Rear Loader is built flexible and tough. Designed to fit what you need for dual-stream refuse collection.

This rear loader is available in two body sizes (25 and 32 cubic yards) and two configurations (a 40/60 or a 75/25 split) to meet the needs of your operation.

The tailgates operate independently, with controls on both sides of the tailgate so you can pack from either side of the truck. The co-mingled collection capability also helps improve your carbon footprint by eliminating the need for another truck to pick up recyclables. When paired with the McNeilus Rear Loader Organics Package option, it makes an ideal truck for organic waste pickup.

SPLIT BODY SPECS-PERFOMANCE SHEET>> DOWNLOAD

Specifications
PERFORMANCE SPECIFICATIONS (IN SECONDS)*

WORKING RPM @ IDLE 40 60
Slide & Sweep Cycle 23-28 23-28
Sweep Extend 5 5
Sweep Retract 3 3
Slide Extend 10 10
Slide Retract 5 5
Compaction = up to 1,000 pounds per yard
Ejector Extend 43 40
Ejector Retract 23 27
Tailgate Lock Extend 1 1
Tailgate Lock Retract 1 1
Tailgate Lift Extend 21 21
Tailgagte Lift Retract 30 30
*Slide/sweep may be run simulatneously or independently from side to side without impacting cycle times.

BODY CAPACITY SPECIFICATIONS

BODY SIZE 25 YD3 (yd/m) 32 YD3 (yd/m)
Volume-Curbside (40%) 10 / 7.7 12.8 / 9.8
Volume-Streetside (60%) 15 / 11.5 19.2 / 14.7
Volume-Curbside (75%) 18.7 / 14.3 24 / 18.4
Volume-Streetside (25%) 6.3 / 4.8 8 / 6.2

BODY SPECIFICATIONS

BODY SIZE 25 YD3 32 YD3
Total Body Capacity (yd/m) 25 / 19.1 32 / 24.5
Approx. Gross Weight (lbs/kg) 21,450 / 9,730 24,200 / 10,977
Roof 10-gauge AR200 10-gauge AR200
Floor 10-gauge AR200 10-gauge AR200
Ejector Face 12-gauge grade 50 high-strength steel 12-gauge grade 50 high-strength steel
Body Sides 1/8" AR450 1/8" AR450
Hopper Floor 3/16" AR200 3/16" AR200
Sweep Face 1/4" AR200 1/4" AR200

TAILGATE SPECIFICATIONS

HOPPER CAPACITY (YD/M)
Swept Volume-Curbside (40%) 1.01 / 0.77
Swept Volume-Streetside (60%) 1.38 / 1.05
Swept Volume-Curbside (75%) 1.79 / 1.37
Swept Volume-Streetside (25%) 0.60 / 0.46

OPERATIONS

Mechanical controls with integrated control panel

HYDRAULICS

Pump Tandem Gear
Pump Flow (750 rpm) 12.4 to 17.4 rpm
Oil Reservoir 55 gallons
Return Filter 5 micron/100 mesh suction
Shut-Off Valve Ball Valve
Ejector and Tailgate Raise Spool Type
Pump Control Cartridge and Manifold Type

CYLINDER SPECIFICATIONS

CYLINDER TYPE BORE (inch/mm)
Tailgate Lift Single Acting (4x) 2.75 / 69.9
Tailgate Lock Double Acting (4x) 2.50 / 63.5
Ejector (25 yd) Double Acting (2x)
4-stage Telescopic 6.25 / 158.8
Ejector (32 yd) Double Acting (5x)
5-stage Telescopic 7.50 / 190.5
Slide (75 ratio) Double Acting (2x) 4.00 / 101.6
Sweep (75 ratio) Double Acting (2x) 3.50 / 88.9
Slide (60 ratio) Double Acting (2x) 3.75 / 95.3
Sweep (60 ratio) Double Acting (2x) 3.25 / 82.6
Slide (40 ratio) Double Acting (2x) 3.25 / 82.6
Sweep (40 ratio) Double Acting (2x) 2.50 / 63.5
Slide (25 ratio) Double Acting (1x) 3.25 / 82.6
Sweep (25 ratio) Double Acting (1x) 3.00 / 76.2

PAINTING

Packer and components steel shot blasted prior to priming with high-solids epoxy primer
Finish coat Akzo Coating's Sikkens high-solids acrylic urethane