Standard Rear Loader

Looking for a refuse vehicle that sets the bar for all others? Find it here with the top workhorse in the industry. You’ll get reliable performance and one of the most versatile rear loading refuse trucks, with features and options, such as a container tipper kick bar for commercial pickup and cart tippers for residential routes, to make collection easier. Our rear loader design also requires less maintenance over the competition, such as fewer lubrication points on the tailgate and self-lubricating slide shoes.

The McNeilus Standard Rear Loader is the ultimate go-to refuse vehicle. It is the most requested, productive and dependable rear loader for residential and light commercial routes..

STANDARD REL SPECS-PERFOMANCE SHEET>> DOWNLOAD

Specifications
PERFORMANCE

Compaction Cycle 16 seconds
Sweep Extend 4 seconds
Sweep Retract 2 seconds
Slide Extend 3 seconds
Slide Retract 7 seconds
Ejector Extend (in seconds) 20 yard: 12; 25 yard: 20; 28 yard: 27;
32 yard: 33
Ejector Retract (in seconds) 20 yard: 13; 25 yard: 28; 28 yard: 30;
32 yard: 40
Tailgate Open 30 seconds
Tailgate Close 18 seconds
Compaction 900 pounds per yard (depending on refuse density)

BODY SPECIFICATIONS

Floor 3/16" AR200
Roof 10-gauge AR200
Side Walls, Front Section (ejector area) 10-gauge AR200
Side Walls, Rear Section (compaction area) 1/8" AR450

OPERATIONS

Hopper Capacity 3 cubic yards
Hopper Floor 3/16" AR200 (standard)

PACKER

Slide Face Plate 3/16" GRD 50
Sweep Face Plate 1/4" AR200
Packer Edge Strip 1/4" GRD 50
1/4" AR200 (optional)

TAILGATE

Tailgate Walls 3/16" AR200
Wear Strips 1/2" x 3" 1044 steel
Tailgate Seal Height 50"

OPERATIONS

Mechanical controls with integrated control panel

HYDRAULICS

Pump Make/Model Single gear or Vane with Pack-on-the-Go flow control system
Control Valves Primary; Parker VA35 with Smart-Pak®
Oil Reservoir 20 yard: 40 gallons, 25–32 yard: 50 gallons
Filter Parker 40 CN, 100 mesh suction strainer

CYLINDERS

Ejector 6-1/4" bore x 5-3/4" rod x 88-3/4" stroke (20 yard, 3 stage), 7-1/2" bore x 7" rod x 119-1/2" stroke (25 yard, 4 stage)
Slide 4-1/2" bore x 3-1/2" rod x 32-1/2" stroke
Sweep 4" bore x 3" rod
Tailgate 2-7/8" bore x 2-1/2" rod x 32-1/2" stroke

PAINTING

Packer steel shot-blasted prior to priming with Akzo Coating's high-solids epoxy primer and acrylic urethane