TK 10

Rated for up to 10 yd3/hr, the TK 10 fills the void between small-line mechanical ball valve pumps and 5- to 6-inch cylinder diameter concrete pumps. The swing-tube design gives operators the benefits of reversing to relieve pressure when pumping difficult low slump or fiber mixes; which increases safety and reduces your maintenance costs.

Specifications:

Applications

Industries     Refractory, Underground, and Civil
Process type     Wet
Performance
Maximum volume output*     7 yd³/hr (4.6m³/hr)
Maximum concrete pressure     2,085 psi (144 bar)
Maximum aggregate size     0.75" (19mm)

Technical Information

Material cylinders     3" x 24" (76x610mm)
Maximum strokes per minute     36
Variable volume control     0 to full
S-Valve (cast)     3" x 3" (76x76mm)
Number of shift cylinders     1
Hydraulic tank capacity     37 gal (140L)
Hopper height     48" (1,219mm)
Hopper capacity     8 ft³ (227L)
Outlet diameter     3" HD (76mm)

Engine

Manufacturer’s model     Deutz D2011L04i
Horsepower     61 hp (45kW)
Fuel tank capacity     15 gal (56L)

Trailer

Axle     Single
Axle capacity     5,200 lbs (2,258kg)
Tires/load range     ST 225/75R15D

Brakes     Electric

Outriggers     Manual
Dimensions
Length     148" (3.75m)
Width     64" (1.62m)
Height     62" (1.57m)
Weight (approximate)     4,000 lbs (1,814kg)

*Optional electric versions have decreased output.

Maximum theoretical values listed. Maximum attainable distances depend on concrete mix design, pipeline diameter and specific job site conditions. Maximum output and pressure cannot be achieved simultaneously. Specs subject to change without prior notice. Weights vary with options selected. Photos for illustrative purposes only. Refer to Putzmeister operational manual for safe and proper equipment operation.