BSA 14000 HP-D 7

High pressure and output provide the muscle behind the BSA 14000 HP-D 7". This trailer pump is ideal for high-rise and long distance concrete pumping and tunnel construction with maximum volume output of 107 cubic yards per hour at 2,638 psi with 7-inch x 83-inch material cylinders. The standard Free Flow Hydraulics reduces changes in material pressure, ensuring smooth pumping and consistent concrete flow.

Specifications:

Performance

Maximum theoretical output* - rod     107 yd³/hr (82m³/hr)
Maximum theoretical output* - piston     71 yd³/hr (54m³/hr)
Maximum theoretical pressure* - rod     2,638 psi (185 bar)
Maximum theoretical pressure* - piston     3,771 psi (260 bar)

Technical Information

Material cylinders     7" x 83" (180x2,100mm)
Variable volume     0 to full
Chromed cylinders     Standard
Hydraulic system     FFH-EL
Hydraulic system pressure     5,075 psi (350 bar)
Hydraulic cylinders     6.3" x 3.5" (160x90mm)
Outlet diameter     5.5" (140mm)
Maximum size aggregate     2.5" (63mm)

Valve & Hopper

S-Valve     S 1812 D
Hopper model     RS 905HF
Hopper capacity     21.2 ft³ (600L)
Hopper height     51" (1,295mm)
Maximum strokes per minute - rod     26
Maximum strokes per minute - piston     17

Dimensions

Trailer type     Tandem axles
Length     264" (6,708mm)
Width     77" (1,950mm)
Height     117" (2,972mm)
Approximate weight     23,800 lbs (10,800kg)

* Specifications subject to change without prior notice. Maximum theoretical values listed above. Maximum output and pressure cannot be achieved simultaneously.

Minimum slump and maximum aggregate size are dependent upon concrete mix design, site conditions and pipeline diameter. Special equipment configurations required to operate on piston side.
Photos and drawings are for illustrative purposes only. For available options, please contact the factory.