BSA 14000 HP-D 11¨

This tough machine is a top performer in high-rise and long distance concrete pumping as well as tunnel construction. The BSA 14000 HP-D 11" has maximum output of 260 cubic yards per hour at pressures up to 1,146 psi with 11-inch x 83-inch material cylinders.

Specifications:

Performance

Maximum theoretical output* - rod     260 yd³/hr (200m³/hr)
Maximum theoretical output* - piston     182 yd³/hr (139m³/hr)
Maximum theoretical pressure* - rod     1,146 psi (79 bar)
Maximum theoretical pressure* - piston     1,668 psi (115 bar)

Technical Information

Material cylinders     11" x 83" (280x2,100mm)
Variable volume     0 to full
Chromed cylinders     Standard
Hydraulic system     FFH-EL
Hydraulic system pressure     5,075 psi (350 bar)
Hydraulic cylinders     6.3" x 3.5" (160 x 90mm)
Outlet diameter     8" (200mm)
Maximum size aggregate     2.5" (63mm)

Valve & Hopper

S Valve: S-2318     9" to 7" (230 to 180mm)
Hopper model     RS 907A
Hopper capacity     21.2 ft³ (600L)
Hopper height     51" (1,295mm)
Maximum strokes per minute - rod     26
Maximum strokes per minute - piston     18

Dimensions

Trailer type     Tandem axles
Length     264" (6,708mm)
Width     77" (1,950mm)
Height     117" (2,972mm)
Approximate weight     23,800 lbs (10,800kg)

* Specifications subject to change without prior notice. Maximum theoretical values listed above. Maximum output and pressure cannot be achieved simultaneously.

Minimum slump and maximum aggregate size are dependent upon concrete mix design, site conditions and pipeline diameter. Special equipment configurations required to operate on piston side.
Photos and drawings are for illustrative purposes only. For available options, please contact the factory.