BSA 2110 HP-D

Extra muscle and even higher pressure is what you get from the BSA 2110 HP-D. Free Flow Hydraulics and convenient controls provide powerful performance with a maximum output of 133 cubic yards per hour and maximum pressure of 2,176 psi for those jobs extending out to 800 feet. Its 21.2 cubic foot capacity RS 900 hopper makes quick work of even the toughest mixes.

Specifications:

Performance

Maximum theoretical output* - rod     133 yd³/hr (102m³/hr)
Maximum theoretical output*^ - piston     92 yd³/hr (70m³/hr)
Maximum theoretical pressure* - rod     2,176 psi (150 bar)
Maximum theoretical pressure*^ - piston     3,190 psi (220 bar)

Technical Information

Material cylinders     8" x 83" (200x2,100mm)
Variable volume     0 to full
Chromed cylinders     Standard
Hydraulic system     FFH-EL
Hydraulic system pressure     5,075 psi (350 bar)
Hydraulic cylinders     6.3" x 3.5" (160x90mm)
Outlet diameter     6" (150mm)
Maximum size aggregate     2.5" (63mm)

Valve & Hopper

S-Valve: S-2015D     8" to 6" (200 to 150mm)
Hopper model     RS 905HF
Hopper capacity     21.2 ft³ (600L)
Hopper height     50" (1,270mm)
Maximum strokes per minute - rod     26
Maximum strokes per minute - piston     18

Dimensions

Trailer type     Tandem axles
Length     268" (6,813mm)
Width     78" (1,977mm)
Height     99" (2,502mm)
Approximate weight     20,000 lbs (9,070kg)

* Specifications subject to change without prior notice. Maximum theoretical values listed above. Maximum output and pressure cannot be achieved simultaneously.
^ Special equipment configurations required to operate on piston side.

Minimum slump and maximum aggregate size are dependent upon concrete mix design, site conditions and pipeline diameter. Special equipment configurations required to operate on piston side.
Photos and drawings are for illustrative purposes only. For available options, please contact the factory.